RAD Cycle Products Adjustable Bike Trainer Fitness... You Save: $34.97 (27%)
- ►ADJUSTABLE HEIGHT: Quickly raise and lower the tabletop from 33.5" to 47"
- ►PORTABLE: Locking casters allow for secure positioning, and moving from the workout to the office.
- ►NON-SLIP SURFACE: The desktop features a non-slip surface that features built in tablet and smart phone slots
- ►VERSATILE: The tabletop includes holes for cable management
- ►DURABLE: The steel construction of the frame will ensure that the RAD Cycle Products Adjustable Bike Trainer Fitness Desk Portable Workstation will hold up to years of use.
BalanceFrom Bike Trainer Stand Steel Bicycle Exerc... You Save: $16.75 (30%)
- Noise (important): There will be load noise when working with rough tires. Quite when working with road bike tires
- Works on any surface: Simulates real cycling feel, rubber feet will prevent scratching wood floor. Built with a wide base and low stance for unshakable balance. Max load 330 lbs.
- Easy to install and release: Install process is easy. Quick release clamp helps clamps your rear wheel tightly. It also helps to take the bike down much easier than other bike trainers
- 8 resistance settings: 8 levels, magnetic resistances meet your specific needs about resistance & speed; handle bar mounted resistance controller easily lets you adjust resistance
- Wide compatibility: Balance from bike, trainer stand Fits any road or mountain bike with a 26-28" or 700C wheel
West Biking Bike Repair Stand(Max 85 Lbs) - Adjust...
- [𝗟𝗜𝗚𝗛𝗧𝗪𝗘𝗜𝗚𝗛𝗧,𝗔𝗗𝗝𝗨𝗦𝗧𝗔𝗕𝗟𝗘&𝗦𝗧𝗨𝗥𝗗𝗬]- the floor-standing bike repair station is made of aluminum alloy to ensure the overall lightness and sturdiness. The weight is only 3.6kg and the folding length is 85cm. It is convenient for you to place it at home. When the repair bike stand is unfolded, the height can be adjusted in 85cm to 150cm. Maximum load is 85bls
- [𝟯𝟲𝟬-𝗗𝗘𝗚𝗥𝗘𝗘 𝗦𝗪𝗜𝗩𝗘𝗟 𝗖𝗟𝗔𝗠𝗣] - The 360° spin clip can be easily rotated to any angle so that makes you more easily to allow access to the bike at any angle without moving your feet. What’ more, this mechanic stand features a 90 degrees fold-out knob that can be easily folds down for storage or to throw into your car and take to an event. this collapsible workstand delivers on every count
- [𝗧𝗥𝗜𝗣𝗢𝗗 𝗙𝗥𝗔𝗠𝗘 𝗦𝗧𝗥𝗨𝗖𝗧𝗨𝗥𝗘] - The park tool bike repair stand adopts the most stable tripod frame structure to ensure that the bicycle will not roll over under any circumstances, and can provide the balance you expect when using the bicycle maintenance stand.
- [𝗪𝗘𝗜𝗚𝗛𝗧 𝗟𝗜𝗠𝗜𝗧-𝗕𝗘𝗙𝗢𝗥𝗘 𝗢𝗥𝗗𝗘𝗥] - NOTE: The maximum weight holding capacity of the repair stand is 85lbs(38.6kg). if you’re working on heavier bikes such as mountain bike, commuter bike, fat bike, or an e-bike, then you’ve to double check to make sure your bike Below that before making a purchase
- [𝗪𝗢𝗥𝗥𝗬-𝗙𝗥𝗘𝗘 𝗣𝗨𝗥𝗖𝗛𝗔𝗦𝗘] - At just 3.6kg, this portable bicycle stand is a reliable work stand for both traveling to events as well as performing home repairs. When it’s not in use it folds tidily into the supplied storage bag. West Biking bike repair stand enjoys a reliable after-sale service. If you have any questions, just feel free to contact us. All issues will be solved within 24 hours
RAD Cycle Products Pro Bicycle Adjustable Repair S... You Save: $10.47 (13%)
- ►HEAVY DUTY - Maximum capacity of 65lbs/30kg due to heavy duty construction.
- ►ADJUSTABILITY - Telescoping stand adjusts from 36" to 60", and will fit standard frames with 1" to 1.5" tubing
- ►CONVENIENT - Clamps hold tight but won't damage your bike's finish, rotates 360 degrees for easy access to every part of your bike
- ►VERSATILITY - Adjustable handlebar rod stabalizes the front wheel, legs fold up for easy storage or transport
- ►CONVENIENCE - Super easy setup and assembly, hex key included
ROCKBROS Bike Repair Stand Wall Workbench Mount Ra... You Save: $6.00 (14%)
- Stably Mounted: The wall mount bike repair stand is secured by four long screws and can be mounted stably and easily. The wall mounted bike clamp acts like a strong arm with a firm grip, holding your bike in a fixed position as long as you need so you can clean or repair bike easier.
- Adjustable Clamp: 360 degrees rotating clamp can hold your bicycle steadily, allows your bike to be held in any angle. Clamp material has a certain softness and protect your bike frame well.
- Height Adjustable: Made of telescopic design, the height of the bike repair stand can be adjusted from 39cm/15.35inch to 55cm/21.65inch simply, suitable for mountain road bikes, also perfect for small bikes such as balance bikes.
- Durable Materials: Made of iron, this home bike maintenance rack is durable for long time. With wall fixed design, the wall beach mount repair stand can support general maintenance and cleaning work.(Tips: Hold up to 20kg/44lbs mounted on work bench, less than 20kg/44lbs mounted on wall.)
- Space Saving: You can choose to install the bike repair stand to the wall or work bench, even post or on the ground. It locks in place against the wall and uninstall arms when not in use, takes up less space and is more convenient to keep at home.
Retrospec Stash Rack 2 Bike Floor Stand Bicycle St... You Save: $6.99 (20%)
- STASH RACK: Retrospec all-new proprietary rack is designed to fit most bicycles including children's bicycles and bicycles with disc brakes.
- RELIABLE BUILD: The weather-resistant fine powder steel coating protects from damaging weather conditions. Modular design allows for multiple racks to be combined to meet your exact need for bicycle storage.
- ACCOMMODATES MOST BIKES: Fits most wheels sizes from kids to Mountain Bikes (12"-29") and tire widths from 23C-3 0".
- SIMPLE CONSTRUCTION: Retrospec's Stash Rack is incredibly simple to assemble. Plus, your new rack doesn't require any hardware to get it up and ready-to-go.
- 2 BIKE: Sturdy floor rack that is easy to assemble and holds 2 bicycles Dimensions 37''L x 14.75''W x 14''H.
Sports Foldable Alloy Bicycle Stand Bike Flo... You Save: $2.00 (5%)
- 【Sturdy Construction but Lightweight】:There are four points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur.The bike's front rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder.Dual arm is better to hold heavy bike than single arm stand. Aluminum alloy material make the bicycle holder light ,only 3.5lbs, make it portable for your outdoor cycling purposes
- 【Quick & Easy Push In】: Effortless push in the rack,This patented great design will be perfect hold your bicycle steady. Seconds Set-up and fold for compact storage to save space, no need tools to install
- 【Protective】: Delicate specification coating with engineering plastics on the corner to protect your bike from nicks and scratches. Spring-loaded arm easily hold front wheel without risk of scratching rim or spokes
- 【Foldable & Portable&Save Space】: A simple one-pull-knob will allow to fold the stand into a flat shape, Only 17.12(L) inch x3.74(H) inch x7.16(W)inch when folded. Saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore
- 【Universal】:Upgrade bike mount holds from 20 millimeter road bike tires to 2.4 inch wide mountain bike tires between 20 to 29 inch wheel size.Perfect for all bike styles: folder, road, MTB incl. 29er, track, BMX, kids.Suit for own use home, garage,office and retail applications
Qualward Vertical Bike Stand Floor Bicycle Rack Ad... You Save: $4.10 (8%)
- Indoor Bike Rack Vertical: The Vertical cycling floor stand is designed to store a bike in your living room, bedroom or garage, suitable for most bikes with the tires less than 2.4" in width. PDF instructions included.
- Upgrade Adjustable Track: Track(15‘’-21‘’) base that adjusts the rack to fit most tires and also makes the bike more stable.
- Adjustable Height: The height of the bike stand is 22.4”-30.3”. Adapts to different heights of mountain bikes, road bikes, racers, children' s bicycles, beach bikes.
- Floor Space Saving: Free up more valuable space and save floor space, great solution for limited indoor space, can be stored in corridors, balconies, warehouses, tool rooms or other places.
- Easy Assembly: Don't need drilling, no damaging walls or ceilings. Durable steel with powder coated finish, no scratching bicycles. Screws and anchors included, store your bicycle quickly and easily.
Bike Nook Bicycle Stand, Portable and Stationary S...
- EASY TO USE UPRIGHT DESIGN - means no more struggling to lift and hang heavy bikes to make room in your houses.
- PREVENTS BIKES FROM DAMAGING - no more scratches or damage to walls, ceilings, cars & more
- LETS YOU KEEP YOUR BIKE INSIDE - protects your bike from weather and damage
- ADJUSTS TO VARIOUS HEIGHTS - for bikes with a 18 inch wheel size or bigger. It requires no drilling! It’s easy to assemble, completely portable, and fully adjustable. Bike Nook is the easiest repair rack for fixing or installing any accessories necessary to improve your cycling experience
- SPACE-SAVING HANDSTAND POSITION - frees 3.5 feet of floor space
Unisky Bike Trainer Stand for Indoor Riding, Stati...
- * [STEADY, STABLE & FIRM]: The indoor bicycle training stand is designed with dual-support structure, make it stable and steady. The strong frame and front wheel riser block included in the package keep it away from wobbling and reach unshakable balance. The structure can load up to 300 pounds. The steady base and adjustable anti-slip rubber feet fits for uneven floor in different conditions, preventing movement for stability on any surface.
- * [BIKE TRAINERS FOR HOME]: For those who love cycling, it is annoying when the weather outside is bad, such as rainy or snowy. With this indoor bike trainer, you can keep riding and love what you love. You just mount your bike on the trainer and begin to ride, do exercise as you want. The two knobs on the left and right of the stationary bike trainer construct the dual locking system, making it easily to lock your bike in place. Enjoy the joy of cycling at home.
- * [EASY to INSTALL&SAVE MORE ROOM]: Considering that you may need to carry and store our bicycle training trainer, it is designed as a folding style. With quick installation in a few minutes, no need other tools, you can begin to ride at home. When you finish cycling or exercise, you can take the bike off the trainer and fold the bike trainer easily. Put it at any corner in your home, or carry it with you to another place.
- * [SMOOTH & LOW NOISE DESIGN]: Smooth exercise bike trainer is necessary for riding at home. The noise reduction wheel makes it almost no sound for the wheel on the trainer. Any noise is affected by the material and tread of bike tires. It is recommended to use slick tires during cycling to reduce vibration and indoor resonance or you can add a carpet under the trainer. If you owned a MTB with rough tires, careful to buy. No matter how expensive the trainer is, MTB tires is possible to be loud.
- * [COMPATIBLE WITH BIKES]: The Unisky indoor bike trainer stand fits most road or mountain bikes with a 26-28" or 700c wheel. There is no need to buy a new one if you have a road or mountain bike of normal size(rear for spacing 130mm / 135mm). Notice: usually the bike trainer is not compatible with electric bikes and barrel or thru axle bikes. If you are not sure, please feel free to contact with us.
Feedback Sports Pro-Elite Repair Bike Stand (Red)...
BalanceFrom Bike Trainer Stand Steel Bicycle Exerc... You Save: $17.11 (29%)
- Noise (important) - there will be load noise when working with rough tires. Quite when working with road bike tires
- Works on any surface - Simulates real cycling feel, rubber feet will prevent scratching wood floor. Built with a wide base and low stance for unshakable balance. Max load 330 lbs.
- Easy to install and release - install process is easy. Quick release clamp helps clamps your rear wheel tightly. It also helps to take the bike down much easier than other bike trainers
- 8 resistance settings - 8 levels magnetic resistances meet your specific needs about resistance & speed; handle bar mounted resistance controller easily lets you adjust resistance
- Wide compatibility - balance From bike trainer stand Fits any road or mountain bike with a 26-28" Or 700C wheel
Bike Trainer Stand Indoor Riding - Sportneer Magne...
- Make Your Own Stationary Bike: Bring your bike inside for an indoor cycling workout! The Sportneer Indoor Bike Trainer fits bikes with a 26-28" or 700c wheel and with rear wheel axel between 4.92'-6.57"
- Spin In Silence: Smooth, seamless design and noise reduction resistance wheel mean you there’s no need to amp up the volume when you build up the burn (Note: The noise is mainly related to the materials and tread of bike tires. We highly suggest you to use road bikes because the noise will be louder if MTB is used.)
- 6 Resistance Settings: Train to your standards with bar-mounted remote and wide range resistance curve to simulate all cycling conditions
- Easy Bike Release: Ready to head outside? Just hit the press-down lever clamp to easily release and remove your ride. Front wheel riser block and rear quick release lever are included for quick installation.
- Stability On Any Surface: Built with a wide base and low stance for unshakable balance. Features 5 adjustable antislip rubber feet to even out any uneven flooring
Alpcour Bike Trainer Stand for Indoor Riding – P...
- MAKE THE SWITCH TO STATIONARY! – Mag Bike Stand Converts Any Mountain or Road Bike Into a Stable, Smooth-Riding Indoor Stationary Bicycle for All-Season Training, Conditioning, Fitness & Exercise – Mag bike stand converts any mountain or road bike into a stable, smooth-riding indoor stationary bicycle for all-season training, conditioning, fitness & exercise – A must-have for dedicated cyclists!
- SUPER QUIET MAGNETIC TECHNOLOGY – High-quality flywheel mechanism creates drag against tire to replicate real cycling experience – Built-in super noise reduction eliminates whir, while reduced friction extends the life of your bike
- 6 LEVELS OF FIXED RESISTANCE – Convenient handle bar mounted cable controller lets you choose your incline from flat to steep – Simulate all kinds of hills, roads & intervals – Extra wide base & low stance ensures perfect balance at every setting
- SAFE, STEADY CONSTRUCTION – Stand is composed of durable, heavy duty stainless steel & includes a front wheel riser block & anti-slip rubber pads to prevent movement – Connects in seconds & releases via quick lever—no tools required!
- FOLDABLE FRAME FOR EASY TRAVEL – Portable stand is hard-wearing yet lightweight & compact so you can fold, pack & go – Kit comes w/ free sturdy bag for effortless carrying & storage – Compatible w/ most 26-28 in & 700c wheels
Ride KAC Bicycle Storage Stand, Foldable Steel Flo...
- FITS YOUR BIKE A universal tire cradle fits most bike tires. Store 650C–700C road and gravel bikes, 26–29 inch mountain bikes, and 20–24 inch kids bikes like a pro. This storage stand is perfect for the garage, the house, or on the trailside.
- SECURES YOUR BIKE Stabilize your bike with either the front or rear tire. This spring-loaded, roll-on system means no more looking for a wall to hold your bike up or trusting your rickety old kickstand. Tire-only contact means your bike stays scuff and scratch-free for years to come.
- PERFECT INSIDE AND OUT This foldable bike stand is the epitome of small but mighty. A 13x14-inch base means you can store your bike in your house, apartment, garage, or shop. Bring your bike in out of the weather without mounting anything on your walls.
- TAKE ON THE GO When you’re ready, simply fold your storage stand up and take it on the road. Never trust your bike to a wall or tree ever again.
- NO SETUP REQUIRED Experience better storage right out of the box. The KAC bike storage stand comes completely assembled and ready to keep your bike upright.
MaxxHaul 80717 Foldable Floor Bike Stand Fits 20&q... You Save: $12.53 (42%)
- East-to-use bike stand holds bike in upright position with a quick one-pull-knob design
- Unique spring loaded dual arm design securely holds front wheel of bike and provide stability
- Arms fold down to a minimum height of 3-1/2 inch when not in use making it easy to store
- Compact and lightweight design for maximum portability. Stand weighs less than 6lbs
- Powder coated finish with non-slip rubber handle
UHACKER Adjustable Bike Kickstand Aluminum Rear Si... You Save: $4.00 (25%)
- 【Types of Application】 This bike kickstand fits for 22"-27"wheel size Mountain Bike/700C Road Bike/BMX bike/MTB bike and Adults Bike. Rear bicycle kickstand fits on rectangular and oval tube chain stays (15mm-28mm).
- 【Stable & Anti-skidding&Safety】 Made of strong and durable Aluminum Alloy with anti-slip pad. Thicken and wear-resisting to prevent slipping on wet surfaces and sinking in mud.Red reflector in the middle of the kickstand can direct you to your bike when its dark outside, or keep other vehicles from running into it
- 【Length Adjustable】 The screw of center kick stand is adjustable and length can be adjustable between 13.25”-15”(33.6-38cm).
- 【Easy To Install】Two wrenches are included with the package, you can easily install the bike kickstand to your bike
- 【Satisfactory Quality Assurance】If you have any questions during use, please contact us through the order number as soon as possible, we will definitely give you a satisfactory answer within 24 hours
Bike Repair Stand - Foldable Home Bike Stand for M...
- Safely Mount Your Bicycle - Bike repairs are easier with this bicycle work stand! This foldable bike stand has a weight capacity of 44-66 lbs. and a clamp that fits crossbars with a diameter of 1" to 1.57".
- Effortless Bike Maintenance - With this bicycle rack stand, you don't need to bend or kneel while doing repairs. Its telescopic arm lets you adjust the height of the bicycle stand from 36.2" to 59.7".
- Fuss-Free Storage - Storing this bike repair stand after use is a breeze, thanks to its foldable design. This feature also makes bringing the bike mount stand with you wherever you go a lot easier.
- Keep Your Ride Pristine - Fitted with a 360° rotating head and a quick-release mechanism, this stand secures your BMX bike, fixie bike, folding bike, or trek bike without damaging its paintwork.
- Maintain A Neat Workspace - Along with the bike stand, you'll also get a tool tray with dividers. This small parts organizer keeps wrenches, screwdrivers, nuts, bolts, and screws within easy reach.
Park Tool Unisex's PCS-10.3 Workstand, Blue, ...
- Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts
- Narrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat posts
- Maximum weight capacity*: 80 lbs. (36 kg)
- Height adjustable from 39" to 57" (990 mm–1450 mm) using convenient quick-release lever
- Folds down to 45" x 14.5" (1140 mm x 370 mm)
BIKEHAND Bike Bicycle Floor Parking Rack Storage S...
- This free-standing floor stand is great when you still need the flexibility to move your bike around, whether it’s in your garage, bike store or at a race. Patent design awarded.
- 2 pulleys design with adjustable position. Fits any bikes with wheel size from 24" to 29". Just a simple "slide in" and that's it! ( Max tyre width: 2.4 inch ≈ 60 mm )
- Either front or rear wheel slides in. Sitting in firmly to make the bike standing 100% stable. This rack only touches on the tyre, thus it’s great for any high end bikes. It brings no scratches on the bike’s frames, disc rotors, cassettes, etc.
- Package: 1 bike holder. Required Assembly Tool Included. Solid Powder coated steel frame with rubber protected base. Perfect for cement or timber floor
- Top quality with a LIFE TIME WARRANTY. Made in Taiwan. Product Weight: 1.96 kg = 4.35 lbs
ROCKBROS Bike Repair Stand Bench Mount Home Bike S...
- Easy to Mounted: The bike clamp bench mount is secured by four long screws and can be mounted stably and easily. Quick release design allows you to easily assemble work bike stand.
- Adjustable Clamp: The bench mount bike repair stand with plastic clamps are sturdy and perform well, Clamp allows for clamping of bike tubes from 30mm to 75mm. Soft non-slip silicone clamp is efficient and non-damaging bicycle paint finish.
- Easy to Use: Rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp. Sturdy, simple design makes servicing a bicycle a breeze.
- Durable Materials: The bike stand for maintenance is made of iron, durable for long time. suit for commuter bike, mountain bike, road bike.(Tips: Load Capacity:44 Pounds)
- Space Saving: You can choose to install the bicycle repair stand to the work bench or wall. Plus you can flip it around when you’re not using it so it doesn’t stick out. more convenient to keep at home. also works great as a bow vice, great value.
BIKEHAND Bicycle Floor Type Parking Rack Stand - f...
- Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes.
- MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.
- FOLDABLE & PORTABLE - A simple one-pull-knob will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore.
- SUPERB DURABLE QUALITY & STUNNING FINISH TO MATCH YOUR BIKE - Heat treated high quality steel with a fantastic powder coated finish. This stand will last forever if used appropriately. FITS NEARLY ALL BIKES: The bike stand will fit almost all bikes range from Kids Bikes, 26" to 29" Mountain Bikes, 650c -700c Road Bikes, EXCEPT those bikes with the tires more than 2.4" in width.
- ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a LIFETIME WARRANTY!
Bike Storage Rack Garage Wall Mount Bike Holder fo... You Save: $10.00 (25%)
- 【Durable&Sturdy】The garage bike rack is made of heavy duty powder-coated steel material, which is durable and rust-proof. Comes with durable screws, which is suitable for hanging all your home bikes.
- 【Easy to Assemble】The wall bike rack is easily assemble in few minutes, comes with detailed Instruction,You can assemble the bike rack with tools which included in the package.
- 【Widely Used】The bike hanger for garage can holds 6 bikes and 6 helmets, which can save your limited space. It fits most kinds of bikes, including road bike, mountain bike, racing bike, adults bike and kids bike and helmets.
- 【Adjustable Hooks】The bike holder position can be adjustable as you needs, you can adjust the distance and height between each hools, conveninent for home use
- 【100% Satisfaction Guarantee】The garage bike rack comes with 12 months quality insurance and 90 days money back, if you have any problem with our products, please feel free to contact. 24 hours service are offered to you.
Delta Cycle Michelangelo 2 Bike Storage Rack - Gra...
- Space Saving Indoor Bike Storage: Featuring An Innovative Low-Impact Stand Design, The Michelangelo 2 Bike Rack Garage Simply Leans Against The Wall And Uses Gravity To Secure Up To 2 Bicycles.Dimensions - 84" x 20" x 16" / 2135 x 501 x 405Features Easy-Adjust arms to accommodate any bike | Maximum Load 80lbs | Premium quality silver powder coat finish | Maximum load of 100 pounds | Easy to assemble; required hardware included | Rubber bumpers protect wall and floor
- Hassle-Free Assembly : The Michelangelo Garage Bike Rack Takes Minimal Effort And Expertise To Install, All You Need Is A Screwdriver. Assembly Hardware And A Wall Strap Is Included To Create A Secure Wall Bike Rack In Minutes
- Fully Adjustable Bicycle Storage : Arms Accommodate Any Bike Size Or Style, Up To 40Lbs. Support Arms Are Repositioned With A Simple Twist, No Tools Needed, Which Means This Rack Is Easy To Adjust Once Assembled
- Quality Steel Construction : This Large Capacity Vertical Bike Rack Securely Holds Up To 2 Bikes And A Total Weight Of 80 Lbs. Durable Rubber Feet Keep This Standing Bike Rack Securely In Place While Protecting Your Floors
- Dimensions - 84" x 20" x 16" / 2135 x 501 x 405
PRO BIKE TOOL Vertical Upright Bicycle Floor Stand... You Save: $14.00 (22%)
- Space Saver - Great for when you're lacking space to store all your bikes, without the need to drill any holes. Perfect for small apartments, garages, in the home or in the shed! The 4 rubberised feet prevent the stand moving on polished floors. NOT to be used as a repair maintenance stand.
- Compatibility - The maximum width of tire that the upright floor stand allows is 2.3", found mostly with off-road tires. The stand also allows for wheels of sizes 26" to 29". This includes standard 700cc road wheels, MTB wheels and hybrid bike wheels. Rear wheel clamp improves stability while storing your bike upright in the stand. Maximum bike weight 44 lbs (22kg). Not compatible when luggage carriers are installed on bike.
- Easy Adjustment - The height of the floor stand seat post stabiliser is super adjustable. Unlike our competitors’ floor stands, you can adjust the height of the stand while your bike is on the rack. To make installation even easier, we've included an elastic wheel strap to prevent your wheel spinning or handlebars turning once in the upright position.
- Convenience is Key! - The upright floor stand not only allows you to store your bike safely, but also protects your delicate drive chain, disc rotors and handlebar shifters/brakes compared to leaning your bike on a wall. Rubber seat post holder prevents any scratches to your frame.
- Pro Quality – We are so confident about the quality of our products that if you have any product issues, we’re very happy to either provide a Refund or a Replacement!
Begona Bike Floor Stand, Freestanding Bicycle Floo...
- 【Fit Nearly all Bikes】 Begona bike floor rack can be appied in 16-24in kids bike, 25-29in mountain bike, 650c-700c road bikes, with non-slip rubber feet. upgrade wide base fits tires up to 3.74" wide bikes, max load-bearing capacity 55lb.
- 【Super Strong Steel Frame】 Made of high strength steel, the bicycle stand has excellent toughness and hardness. The high-quality steel frame can securely hold heavy-duty bikes without wobbling and deformation. Moreover, this indoor bicycle rack is powder coated for long term use against rust.
- 【Effecient Parking Solution】 Use Begona bike rack to easily park your bicycle in various occasions, such as apartment, garage, yard, etc. No more worrying about where to put your bike with the free standing bike rack, avoid leaning against walls or other objects, and free up space in your room.One wheel stabilizier strap come with bike stand for free, fixed tires for stability.
- 【Stable Structure and Convenient Push Design】 Park your bike on the front or rear wheel without damaging the spokes or tires. Align the wheels with the wheel stabilizer and push the bike inward until the wheel stabilizer pops out to secure the wheels. Non-slip pad can effectively protect your floor.
- 【Begona Bike Rack Promise】 To ensure great shopping experience, Begona bike stand undergone at least 3 times of inspections before shipment. If missing pieces or not qualified with our bicycle stand rack, please contact us directly,we will replace or refund to you with 365 day gurantee.
E Bike Repair Stand (Max 100 lbs) - Bike Stand for... You Save: $10.00 (7%)
- [High-end Carbon Frame]: This bike repair stand features an heavy duty carbon steel construction with a textured powder coat finish for great stiffness and durability. The maximum load is 100 lbs which means it’s able to hold up any fat bikes as well as most e-bikes.
- [360-degree Swivel Clamp]: The clamp can rotate 360 degrees and fits 1” to 1.75” diameter tubes and seat posts of any shape, allowing the bike to sit at any angle by clamping on the frame tubes or seatposts, and it is rubber-coated so no worries about scratches.
- [Easy Handling]: The height, tilt, and angle are all adjusted conveniently via quick-release levers. This bike stand can be adjusted in height from 41” to 72”, it folds quickly, easily and compactly for storage (40” x 12.5”).
- [Handy Tool-plate]: A pretty handy foldable magnetic tool-plate is included, with holes for tools.
- [Warranty]: All bike stands are precision-manufactured and undergo a professional test before leaving the factory. We also offer 3 years factory warranty, if you have any problems, please feel free to contact us.
BV Adjustable Bicycle Bike Kickstand with Conceale... You Save: $6.01 (30%)
- Tool-less adjustabe length - Spring-loaded latch for adjusting the length of the kickstand
- Non-slip sole and wide reinforced plastic foot prevents slipping and sinking in mud
- Steel hexagonal bolt prevents the foot from sliding off the kickstand and deters vandals
- Any angle stance (great for balancing bikes on uneven ground)
- For bicycles 24"-29"
Thinvik Bike Front Wheel Riser Block, Bicycle Stab... You Save: $7.00 (44%)
- Fits most road and mountain bike tires,tires width up to 1.8’’.Provides 1.4" rise.
- STABLE & RELIABLE: Front wheel riser block increases stability and achieves level riding position. The skid resistance design could also keep you safe and your bike steady, and avoid any damages may caused on your floor.
- It has a graduated interior designed to suit both mountain bike wheels and road bike wheels.
- Sturdy molded plastic with no slip feet,Dimensions: 9" x 5" x 2.5"
Park Tool PCS-9.3 - Home Mechanic Repair Stand, On...
Elevon Bike Repair Stand Portable Mechanic Rack He... You Save: $25.98 (32%)
- 360 DEGREE ROTATABLE CLAMP – your bike will be held very steady
- HEIGHT ADJUSTABLE BODY- adjustable height 38.5-61.5in and max load 60 lbs
- MAGNET TOOL PLATE- large tray to place your various tools and helps to keep screws and nuts and bolts from disappearing
- FRONT WHEEL NO SHAKE- Tighten rod included in the package won’t let the front wheel swivel when you are working, the tighten rod is also length adjustable
- STRONG ALUMINUM ALLOY MATERIAL- Lighter, portable, easy carry and storage, no corrosion
Bike Repair Stand -Shop Home Bicycle Mechanic Main...
- 360 DEGREE ROTATABLE CLAMP & HEIGHT ADJUSTABLE BODY- Clamp with lever can hold your bike super steady, adjustable height make sure your waist comfortable during work
- DURABLE WELDED IRON – Lighter, no corrosion, easy carry, easy storage, intensity of iron tested can afford max load 60 pounds bike
- TOOL TRAY WITH MAGNET- Big tray has customized place for different tools, more space-efficient, also magnet can collect crews and nuts without missing
- FRONT WHEEL NO SHAKE- Tighten rod included in the package won’t let the front wheel swivel when you are working, the tighten rod is also length adjustable
- SUPER STEADY TRIANGLE BASE WITH RUBBER FEET- Holds bikes steady, rubber feet antiskid and won’t scratch floor
Yaheetech Magnetic Bike Trainer Stand Premium Stee...
- Max. Load Capacity: 265 lb / 120 kg; Suitable for 26'' to 28'' and 700C wheels;Unfolded overall dimension: 21.5 x 23.8 x 14.8’’ / 54.5 x 60.5 x 37.5 cm (WxDxH); Folded overall dimension: 21.5 x 7 x 17.3’’ / 54.5 x 18 x 44 cm (W x Thickness x H)
- Protective levelness-adjustable feet caps: This magnet turbo trainer is secured by four non-slip feet caps, to prevent the trainer from displacing or damaging the floor during a workout. On each gear-like cap, the “teeth” are varied in thickness. You can rotate the cap and choose the right thickness to level the trainer.
- Smooth operation: This low-noise magnetic turbo gives you a quiet exercise environment. Please note that the noise/friction sound comes from the friction between the wheels and the trainer. Our indoor bike trainer itself doesn’t contain any noise-causing parts.
- Why an indoor bike trainer: When the bad weather tries to stop your cycling training, or somehow you just don’t feel like leaving the house and driving to the studio to get in your daily spin classes, then the indoor bike trainer is a handy and practical solution to your worries. With the cycling trainer, you can exercise at home with ease and leave those subjective or objective excuses behind.
- Use Tips: This bike trainer is designed for bikes with quick-release axles. Thru-axle adapters (not included) are needed for thru-axle bikes. For reducing humming sound, we recommend equipping your bike with slick tires and using the bike trainer on a carpet.
Bike Trainer, Magnetic Bicycle Stationary Stand fo...
- 【Indoor Bike Trainers】: One of the problems with cycling, though, is that when the weather gets bad, conditions can keep you off the road or trail. Maybe it is raining or is too windy outside, or perhaps you need to avoid rush hour traffic or an unsafe dusk ride. This is when you just mount your bike on to a bike trainer and get the exercise that you want, but at home. There is no reason why you can not exercise with your bike when the outside weather is bad.
- 【Strong Structure & High Load-bearing Capacity】: The unfolded bicycle training stand forms a pyramid structure, which greatly improves the stability of the entire frame. Its strong material and stable structure enable it to withstand a weight of 330 pounds. In addition, any bicycle with a wheel diameter of 26 ''to 29'' including 700c can be fitted to our stand.
- 【6 Level Resistance Adjustable】: The trainer includes a drive-by-wire device so that you can change the resistance from your handle bars directly. You can adjust the magnetic resistor and switch the six resistance levels in seconds to meet your requirements about resistance and speed.
- 【Smooth & Low Noise Operation】: There is almost no sound on the wheels on the riding platform. It is recommended to replace smooth tires during cycling training to reduce vibration, reduce indoor resonance or add carpet under the stage. In some cases it will be loud with MTB tires. If you owned a MTB with rough tires, careful to buy. Because MTB tires will be loud with all bike trainers, no matter how expensive it is.
- 【Portable Folding Bike Exercise Stand】: In order to facilitate users to carry and store our bicycle training rack, we designed it into a folding style. It just takes a minute to set it up, clamp your rear axle with the quick clamp and adjust the contact between the wheel and the polished roller. No need to use other tools, you can directly complete the installation and disassembly process by putting up or unfolding the stand.
GOEHNER's E Bike Repair Stand Heavy Duty (Max... You Save: $10.00 (7%)
- 【Extra Heavy Duty & Strong E Bike Stand】 Max Load 110lbs. The stand is made of steel with heavy duty tubes and strongly welded head and clamps, plated with ABS to avoid any bike scratches, offering elevated performance, sturdiness and durability for home or shop bicycle mechanics in repairing or maintaining heavy e-bikes or fat-tire road mountain bikes.
- 【360 Degree Head Rotation】 Featuring a strong quick release lever and a teeth ratchet, this floor-standing bike workstation can sturdily hold tightly the heavy bikes at any angle, clamp on the seat post, top-tube or bottom-tube. So you can always find an optimal position for ease of operation.
- 【Remarkable Adjustments】 41"-72" height adjustment is designed for wider application. The clamp on this stand holds up to 1-1¾ inch triangular or oval shaped diameter tubes. Versatile and convenient!!
- 【Handy Tool Plate】 The package contains a foldable magnetic tool board, which helps to avoid losing small parts.
- 【100% Customer Satisfaction】Backed by 90-day, no questions asked 100% hassle free money back guarantee, you can rest assured that we will provide a lifetime of dedicated customer service.
Erfo Bike Repair Stand, Wall Mount Bicycle Mainten...
- 【High Quality】: The bicycle repair stand is made of high quality ABS and carbon steel, which is strong and durable. The maximum weight of the workstand is approximately 66 pounds (30 kg).
- 【Adjustable Clamp】: The clamp can be rotated 360 degrees to fix your bike. Adjust the appropriate angle according to your needs, so that the bicycle can be fixed arbitrarily. ABS material will better protect your bicycle.
- 【Adjustable Height】: The wall mount bike repair stand is adjustable design, the height can be adjusted as your needed to suit different kinds bicycles. Easily adjust, choose the length that suits your car, saving more space.
- 【Space Saving】: The bicycle maintenance workstand repair rack is used for repairing and maintaining bicycles, saving space and making the room more tidy. It is an indispensable tool for home, garages, bicycle shops and other applications.
- 【Stably Mounted】: The bike repair stand is fixed by 4 screws for stable installation. You can fix the bike in a suitable position as needed and easily repair or maintain the bicycle. Suitable for many kinds of bicycles, such as mountain bikes, folding bikes, road bikes...
Bikehand Bicycle Floor Type Hub Mount Parking Rack...
- SOLID & STABLE: Solid one piece steel construction bike hub mount type. With its 5 lbs weight and the 11 inch wide base, this solid stand can hold the bike at ease.
- EASY TO USE:Just place the rear hub axle into the holder. Fast and simple bike parking solution.
- COMPATIBILITY: FIT 26”, 27.5” and 700c bikes: It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 29" bikes, please look at the other model with higher or adjustable holding arm. (YC-109H or YC-109AF)
- RUBBER COATING: The holding arm are rubber coated to protect the frame and hubs. Rubber sleeve may wear after using for a while. Do NOT worry, we stock the sleeves for replacement.
- ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a LIFETIME WARRANTY!
GEEDIAR Bike Front Wheel Riser Block Stabilize Bik... You Save: $7.30 (38%)
- It's a simple molded plastic stand for front wheel when in a static stand for bike workouts
- This bike riser block keeps your bicycle's front tire in place and raises the front just enough that you will not be sliding off your seat while pedaling.
- 3.Internal design guarantees maximum wheel stability
- Anti-slip feet stay in place and eliminate handlebar vibrations
- Suitable for 95% size of road and moutain bikes/bicycles except Beach Cruiser.
Veltuno Magnetic Indoor Bike Trainer Stand w/8 Spe... You Save: $34.00 (38%)
- 【 MAGNETIC TECHNOLOGY】High-Quality Flywheel Mechanism Creates Drag Against Tire to Replicate Real Cycling Experience. (Note: The noise is mainly related to the materials and tread of bike tires. We highly suggest you to use road bikes because the noise will be louder if MTB is used.)
- 【8 LEVELS OF FIXED RESISTANCE】When you reach one level, you feel like riding on a flat ground. When you adjust bike trainer stand resistance to three levels, you will experience something like riding on the sand. If you have confidence in yourself, you can set the bicycle trainers resistance level to seven. It's like climbing a slope.
- 【Sturdy And Durable】Our bike trainer is made of high quality carbon steel and can guarantee at least 330 pounds of weight.ncludes a Front Wheel Riser Block & Anti-Slip Rubber Pads to Prevent Movement – Connects in Seconds & Releases Via Quick Lever—No Tools Required!
- 【FOLDABLE FRAME FOR STORE AND EASY TRAVEL】Portable Stand is Hard-Wearing Yet Lightweight & Compact So You Can Fold, Pack & Go.When you want to use it, just take the bicycle trainers out and start exercising.Don’t let the weather affect your exercise.
- 【Product Information】Color: black; Materials: steel, iron, PE plastic, magnet; Max. Load Capacity: 330lb / 150 kg ; Suitable for 26'' to 28'' and 700C wheel.
Alpcour Fluid Bike Trainer Stand for Indoor Riding... You Save: $60.00 (24%)
- MAKE THE SWITCH TO STATIONARY! – Fluid bike stand converts any mountain or road bike into a stable, smooth-riding indoor stationary bicycle for all-season training, conditioning, fitness & exercise – A must-have for dedicated cyclists!
- NEAR SILENT FLUID TECHNOLOGY – High-quality flywheel mechanism creates drag against back tire to replicate real cycling experience – Built-in super noise reduction eliminates whir, while reduced friction extends the life of your bike
- POWERFUL PROGRESSIVE RESISTANCE – Impeller spins inside the wheel’s liquid & heats up to increase resistance as you pedal faster, so the sky’s the limit! – Simulate roads, hills & intervals with life-like accuracy, No adjustment necessary
- SAFE, STEADY CONSTRUCTION – Stand is composed of durable, heavy duty stainless steel & includes a front wheel riser block & anti-slip rubber pads to prevent movement – Includes dual tension knob & lock ring for superior security
- FOLDABLE FRAME FOR EASY TRAVEL – Portable stand is hard-wearing yet lightweight & compact so you can fold, pack & go – kit comes w/ free sturdy bag for effortless carrying & storage – Compatible w/ most 26-29 in & 700c wheels
Bike Folding Stand Floor Parking Rack Alloy Bicycl...
- ✓【With Traveling Bag & Foldable 】- Saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore.
- ✓【Perfectly Hold Your Bike&Fit 20"-29"】- Most Stable Bike Storage Garage: Spring-loaded arm easily hold front wheel without risk of scratching rim or spokes,The bike's front rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder.Dual Arm is better to hold heavy bike than Single Arm Stand.
- ✓【 Prevent Scratch】- Delicate specification coating with engineering plastics on the corner to protect your bike from nicks and scratches. Spring-loaded arm easily hold front wheel without risk of scratching rim
- ✓【Portable & Lightweight】- Aluminum alloy material make the bicycle holder light ,only 3.5lbs, make it portable for your outdoor cycling purposes.
- ✓【GUARANTEE】- We trust our products' quality and want your fully satisfaction, If it appears any quality problem or anywhere you are not satisfied, we promise to refund.
DASBET Bike Repair Storage Stand Wall Mount Bicycl...
- Premium Material : Made of steel and plastic,mounting flange has 4 holes,sturdy and stable to hold up to 45lbs (20kg),so it is sturdy enough to support your bike.
- Adjustable Clamp: Clamp suitable for diamemter between 1 inch-1.5 inch(25MM-40MM), it allows your bike to be held in any position.
- Make Repair Easy: If you ride regularly, whether you’re commuting or blazing a trail, then there’s work to do to keep your bike in good running order.
- Space Saving: The wall mount bike stand is compact and as it’s wall-mounted, it makes use of dead space. It folds away when not in use so you can install it next to a car or bike parking spot.
- No Need to Ask for Help: The wall mounted bike clamp acts like a strong arm with a firm grip, holding your bike in a fixed position for as long as you need so you can give both hands to cleaning, calibrating and repairing your bike.
IPETRK Bike Kickstand For Kids Bike - Rear Mount S...
- 【FIVE SIZE OPITONS】Please not this kickstand is not adjustable in length. Five sizes to choose from (12” 14” 16” 18” 20”). You can choose the right size kickstand according to your bike.
- 【BUILD-IN SPRING】The spring of this kickstand is build-in, which is better appearance.
- 【TOP QUALITY MATERIAL】It is made of toy quality carbon steel. Rustproof, strong and durable.
- 【NON-SLIP DESIGN】The support points are covered with non-slip rubber, so it can make your bike stand stably even on slippery ground.
- 【EASY TO INSTALL】You just need to remove the original nut from your bike, install the kickstand and then screw the nut back.
WALMANN 2 Bikes Floor Bike Stand, Bike Parking Rac...
- 🚲【FLOOR BIKE ORGANIZER】If you use your bikes a lot and don’t want to hang them, try this floor bike rack! Bicycle floor stand will declutter and keep bikes upright in garage, did not have to face the bikes in different directions. This looks nice and works really well to condense the space our bikes take up in the garage.
- 🚲【SIMPLE&PRACTICAL&MODULAR DESIGN】The bike stand rack constructed by premium square steel tubing and round steel tubing, simple and practical, fits most standard road and mountain bikes with 22-28" wheels, Max. tire width 2.15".
- 🚲【STRONG AND STABLE CONSTRUCTION】Bike floor stand is made of high-quality steel, it's solid metal, strong and sturdy. Covered with powder-coated black finish for long lasting and resists rusting. Excellent weld and connected with screws and mounted to floor or wall, more sturdy than the snap-together design ones and will not tip over.
- 🚲【EASY TO ASSEMBLE/USE】Bike stand for garage comes with instruction and screws, installation is a breeze. Bike floor rack should be mounted to concrete floor or wall to make stable. Bikes fit best front to back, but also fit fine both facing front. Be careful of the disc brakes when the wheels in the bike rack.
- 🚲【PROFESSIONAL AFTER-SALE SERVICE】 We offer 2 years warranty and 24 hours e-mail service support, if you are not satisfied with the bike stand floor, just send emails to us and we will offer a 100% no question asked REFUND or REPLACEMENT. Place the order NOW!
E Bike Repair Stand Bicycle Stand (Max 100 lbs) - ... You Save: $10.00 (7%)
- [High-end Carbon Frame]: This bike repair stand features an heavy duty carbon steel construction with a textured powder coat finish for great stiffness and durability. The maximum load is 100 lbs which means it’s able to hold up any fat bikes as well as most e-bikes.
- [360-degree Swivel Clamp]: The clamp can rotate 360 degrees and fits 1” to 1.75” diameter tubes and seat posts of any shape, allowing the bike to sit at any angle by clamping on the frame tubes or seatposts, and it is rubber-coated so no worries about scratches.
- [Easy Handling]: The height, tilt, and angle are all adjusted conveniently via quick-release levers. This bike stand can be adjusted in height from 41” to 72”, it folds quickly, easily and compactly for storage (40” x 12.5”).
- [Handy Tool-plate]: A pretty handy foldable magnetic tool-plate is included, with holes for tools.
- [Warranty]: All bike stands are precision-manufactured and undergo a professional test before leaving the factory. We also offer 3 years factory warranty, if you have any problems, please feel free to contact us.
Yaheetech Magnetic Bike Trainer Stand w/ 6 Speed L...
- 6-speed adjustment: With a simple twist at the handlebar-mounted cable-attached adjuster, you can adjust the magnetic resistor and switch the six resistance levels in seconds to meet your requirements about resistance and speed.
- Color: black; Materials: steel, iron, PE plastic, magnet; Max. Load Capacity: 265lb / 120 kg ; Suitable for 26'' to 29'' and 700C wheels
- Make full use of what you already own: For cyclists who want to train uninterrupted by inclement or seasonal weather, this stationary bike stand is a practical and handy solution. With the cycling trainer, you can exercise at home with ease and leave those subjective or objective excuses behind.
- Protective levelness-adjustable feet caps: This magnet turbo trainer is secured by four non-slip feet caps, which prevents the trainer from displacing or damaging the floor during a workout. On each gear-like cap, the “teeth” are varied in thickness. You can rotate the cap and choose the right thickness to level the trainer.
- Smooth & Silent: Noise reduction resistance wheel helps cut out the spinning sound and offers you a quiet exercising environment and a good way to avoid bothering others as well. Highly recommended for apartment/condo/shared space dwellers. The smooth resistance wheel is also protective to the wheel, extending the lifespan of your bicycle.
Bike Kickstand for 16 18 20 Inch Kids Bike, Adjust... You Save: $3.00 (21%)
- A great replacement of training wheel, suitable for 16 18 20 inches kids bikes, help kids learn to park bikes conveniently and neatly
- This is a special bike stand for 16-20 inch small bicycles, which can be adjusted to suit different size bicycles by adjusting the height
- The bike kick stands are made of sturdy aluminum alloy to support the bike stably
- The non-slip feet of the bike stand increase the friction with the ground for better stability
- Installation is very simple, 4mm and 5mm hex screws are included in the package to help you quickly install and adjust
WEEGEEKS Universal Bike Stand, Bicycle Stand, Fold... You Save: $2.00 (13%)
- 【Foldable & Handy】 This can be easily stowed away in small storage spaces with its quick-setup folding feature.
- 【Durable Bike Rack】 Highly durable and uniquely constructed for long-lasting biker‘s usage! Easy & adjustable bike storage. Knobs on both sides allow you to fold/unfold & adjust the height easily.
- 【Great for the Home Mechanic】 Applicable to adjust drive train, fix brakes, bike repairs, storage, parking, cleaning, maintenance, and so on.
- 【Ideal Indoor Bike Stand】This bike stand can be placed anywhere you want. Whether indoors or outdoors, you are sure you can keep your bike parked safely. It can also be used as a bike display stand in or during exhibitions! Portable bike easy utility stand.
- 【Stationary & Secure Bike Stand】Rotating mounts allow for a secure fit on the bike’s rear hub axle.
- 【Note】This stand suitable for 20 - 27 inches bikes, may not work on quick-release bike wheels.